place and play bluetooth ? module new pan1026 series panasonic new product introduction dual mode, place and play bluetooth module introducing panasonics bluetooth dual mode, place and play rf module, the pan1026 featuring an embedded arm processor, bluetooth 4.0, serial port profle (spp), command set api and integrated antenna. this cost-engineered solution is based on a single chip solution that integrates an arm processor with a bluetooth controller. bluetooth 4.0 combines the data rate of bluetooth classic (3mb/s) and ultra-fast connection time of bluetooth low energy (3ms). bluetooth low energy is designed to create low data rate networks using a minimum amount of power. the embedded serial port profle (spp) frees application resources while the command set api creates a simple but fexible frmware interface. an onboard antenna does away with 2.4ghz rf circuit complexity. created with the design engineer in mind, product design cycles are greatly reduced using panasonics free of charge reference design and design review services 1 . pcb layouts are simplifed using available gerber fles and minimized with panasonics tiny footprint technology. the module is just 15.6mm x 8.7mm x 1.9mm and fully shielded to improve immunity. all panasonic bluetooth rf modules carry fcc, ic, ce and bluetooth certifcations. the pan1026 recognizes apples authentication coprocessor and supports bluetooth communication 2 with apples iphone and ipad?. connectivity also includes android, smart phones and all bluetooth enabled devices 3 . ? bluetooth version 4.0 ? industrial temperature range, -40 to +85c ? high sensitivity: -87dbm ? output power: 4dbm ? single v cc supply: 1.7 to 3.6 v ? wifi coexistence ? high-speed interfaces: usb 2.0 uart up to 4.3 mbps ? integrated arm 32-bit processor ? ios and android devices ? wireless sensors ? cable replacement ? instrumentation ? medical ? automotive website: www.panasonic.com/industrial industrial@us.panasonic.com 1-800-344-2112 copyright ? 2013 panasonic corporation of north america. all rights reserved. specifcations are subject to change without notice. pan1026 series npi, fy13-078-xxx features applications rohs compliant *apple ipad and iphone are trademarks of apple inc 1. services are reserved for qualifed customers. contact one of panasonic manufacturers sales representatives for more information. 2. apple authentication coprocessor and mfi certifcation are required for communicating with apple idevices. 3. connectivity requires that devices support bluetooth serial port profle prototyping and testing are accelerated by utilizing the eval_pan1026 development kit and easydualmode software development environment. the eval_pan1026 contains two pan1026etu development modules on panasonics etu platform C etu for easy to use. easydualmode allows both ble and bluetooth classic application development in a single environment. easydualmode software is available free of charge on panasonics rf module website. pan1026etu development module
eeprom filter toshiba tc35661 1-chip lsi crystal 26 mhz v s upply audio pcm/i2s/usb uart slow clock 32.768 khz block diagram (pan1026) parameter value condition receiver sensitivity -87 dbm typ. ideal signal output power +4 dbm typ. @ 50 ohm antenna pin power supply 1.7 to 3.6 v single voltage operation transmit 46 ma acl, dh1 receive 46 ma acl, dh1 operating temperature -40 to +85 c technical characteristics part number description enw-89837a3kf pan1026 bluetooth module, spp, integrated antenna eval_pan1026 pan1026 evaluation kit ordering information website: www.panasonic.com/industrial industrial@us.panasonic.com 1-800-344-2112 copyright ? 2013 panasonic corporation of north america. all rights reserved. specifcations are subject to change without notice. pan1026 series npi, fy13-078-xxx for detailed specifcation information on the pan1026 place and play bluetooth module, visit our website at: http://www.panasonic.com/rfmodules/ additional information
|
